? faraday technology. as part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice fara083d.doc page 1 of 2 aug-01 (c) surface mount compatible small size, low cost video performance 50, 75 or 200 ohms this range of smd delay lines is suitable for automatic placement and reflow, and so do not add the excessive production costs associated with through hole devices. they are designed to delay video bandwidth signal with minimal distortion. the equalised lines allow small delay differences between signals to be matched and give excellent response to pulse and bar test signals. they may also be cascaded to give wider ranges of delay times. common specifications: other delay times and impedances supplied upon request. part number delay time group delay ripple impedance da01a 1 ns < 0.5 ns 50 w da02a 2 ns < 0.5 ns 50 w da05a 5 ns < 1.0 ns 50 w da10a 10 ns < 1.0 ns 50 w db01a 1 ns < 0.5 ns 75 w db02a 2 ns < 0.5 ns 75 w db05a 5 ns < 1.0 ns 75 w DB10A 10 ns < 1.0 ns 75 w dc01a 1 ns < 0.5 ns 200 w dc02a 2 ns < 0.5 ns 200 w dc05a 5 ns < 1.0 ns 200 w dc10a 10 ns < 1.0 ns 200 w tolerance on delay time at 200 khz 2% bandwidth > 5.5 mhz amplitude ripple < 0.1 db return loss > 27 db pulse and bar k-rating(2t) < 0.5% luma/chroma gain inequality(20t) < 1% luma/chroma delay inequality(20t) < 5 ns temperature range 0 to 70 0 c aqueous washable yes smd reflow limitations as data sheet fara309 package dr00142a d series smd video delay lines
package detail faraday technology ltd. tel: + 44 (0)1782 661501 croft road industrial estate, fax: + 44 (0)1782 630101 newcastle, staffordshire email: sales@faradaytech.co.uk st5 0qz. england. web site: http://www.faradaytech.co.uk fara083d.doc page 2 of 2 aug-01 (c)
|
